Plain Cable Bolt
Plain Cable bolt is made of high strength steel wire, the material grade is 1860Mpa.
Plain Cable Bolt
Plain Cable bolt is made of high strength steel wire, the material grade is 1860Mpa.
Applications
Product Introduction
Plain Cable bolt is made of high strength steel wire, the material grade is 1860Mpa. Compared with the common rock bolt,Cable bolt could provide higher tensile strength, anti-shearing capacity and incomparable bending capacity, which could prevent the lateral movement of strata. Usually be used in the area where common grouted support is vacant or inadequate, and especially good for permanent ground support with some resin cartridge.
Features and Advantages
-Available in single strand or twin strand.
-Fish hooks fitted to top of cables for retention prior to grouting.
-Resin could be applied for immediate point anchorage and grout for permanent support.
-Plain Cable bolt could provide higher tensile strength,anti-shearing capacity and incomparable bending capacity, and could prevent the lateral movement of strata.
Mechanical Properties
| Cable Diameter | 15.2mm/17.8mm/18.9mm/21.6mm/21.8mm |
| Strands | 1x7 / 1x19 |
| Tensile Strength | 260KN/350KN/387KN/504KN/530KN |
| Min Elongation | 3.5% |
Accessories
Bearing plate, Barrel & Wedges.
Length and Package
Length:500mm-6200mm in pieces in coils.
Package:20pcs each bundle or as requested.
Product real scene
