Full Threadbar Bolt
- Specification
Full threadbar boltis made of hot rolled rib bar. which has great anchoring effect and can be cut according to demands.
Functions:
Being used with face plate, domed ball,anti-friction washer and nut.
Full treadbar bolt can be an effective rock reinforcement system for ground support.
Features&Advantages:
Available in left hand or right hand tread.
Higher thread ribs mix resin better and improve anchorage.
Suitable for using with either resin cartridges or cement grout.
It has equal strength on the entire length.
Due to continuous thread on entire length. the nut can be fastened upward at any place. This will increase the material utilization ratio and save cost.
Available in black or hot dip galvanized.
Mechanical Properties
ITEMNO. | DIA. | MASS | YIELD STRENGTH≥335MPa | YIELD STRENGTH≥500MPa | YIELD STRENGTH≥890MPa | ||||||
(mm) | (kgs/m) | YIELD (kN) | TENSILE (kN) | ELONGATION | YIELD (kN) | TENSILE (kN) | ELONGATION | YIELD (kN) | TENSILE (kN) | ELONGATION | |
16 | 16 | 1.5 | ≥67 | ≥97 | ≥17% | ≥100 | ≥135 | ≥15% | ≥178 | ≥231 | ≥9% |
18 | 18 | 1.9 | ≥85 | ≥123 | ≥17% | ≥127 | ≥171 | ≥15% | ≥226 | ≥293 | ≥9% |
20 | 20 | 2.4 | ≥105 | ≥152 | ≥17% | ≥157 | ≥211 | ≥15% | ≥280 | ≥364 | ≥9% |
22 | 22 | 2.9 | ≥126 | ≥182 | ≥17% | ≥189 | ≥255 | ≥15% | ≥337 | ≥438 | ≥9% |
Bearing plate:
Round plate, domed plate
Accessories:
Domed nut, hex nut, anti-friction washer,domed ball
Length & Package
Bolts are packaged in bundles.
Bolt fittings, such as nuts, anti-friction washers and domed balls, are supplied fitted to rock bolts in the configuration requested.
Applications:
Mines
Tunnels
Slopes
Places where need ground support